Control Switch and Liquids
- Coraxus
- Cyborg
- Posts: 87
- Joined: Jul 14th '06, 07:47
- Location: DryDock Station orbiting over Sov. Latifundia
- Contact:
I'm using Anvil for OS X to make a simple map. Question is, how do I set up the control switch so that the player can at least toggle it by using the action key, problem is, it won't toggle unless I punch it which I don't want to resort to, also, how do I change the height of liquids, I so far managed to put one in but it's at a height I don't want, thanks for any advice.
This is where I stopped reading.Coraxus wrote:I'm using Anvil for OS X to make a simple map.
DittoThis is where I stopped reading.
Use Tags?
Last edited by Zott on Aug 29th '07, 23:00, edited 1 time in total.
I'm assuming you meant you're using FORGE and that you're ON osx (you c an't run forge in osx, you need classic or sheepshaver or something) anyway, switches can be toggled differently depending on tags as zott said and in liquids the default if I remember correctly is the maximum tide for height, and you have to use a light to make it sink/rise (have a tide).
- Coraxus
- Cyborg
- Posts: 87
- Joined: Jul 14th '06, 07:47
- Location: DryDock Station orbiting over Sov. Latifundia
- Contact:
Okay, so then I have to assign a tag in the platform parameters to make it work and as for height of liquid, I didn't know you had to use light settings to do that, so I'll try it out.
For a switch activating a platform go to the switch in visual mode and adjust it (get the menu for it out) then make sure nothing is checked (like breakable, only toggled by weapons etc.) also, the height is usually 0.25 or 0.3 WU abouve the ground atound it, and the ceiling is usually .5 WU aboev that (so if your floor is set to zero, make the floor height around the switch 0.25/0.3 WU and the ceiling 0.8 WU).
Normally you can only have one type of liquid per level which is set by the environment setting you chose (environments are named the same as liquids) but there is a way to have all textures or something in forge/A1 which I think treellama made or enabled, although I never paid attention as to how, because I never had to use it.
- Coraxus
- Cyborg
- Posts: 87
- Joined: Jul 14th '06, 07:47
- Location: DryDock Station orbiting over Sov. Latifundia
- Contact:
That's what I thought was the case, but when I first created a .lev file, I chose a lava environment, yet it gives me water. So maybe I thought I did something wrong.
Also, one more question, is it possible to stack Bobs and monsters?
Also, one more question, is it possible to stack Bobs and monsters?
Last edited by Coraxus on Aug 30th '07, 02:21, edited 1 time in total.
You mean stack like in SC where theres tons of guys in one spot firing at you? well it would glitch up slot im guessing, but you could use zoom alot... and place lots of monsters really close togetther, not right on top though. I thinkit has to do with collisions.
- Coraxus
- Cyborg
- Posts: 87
- Joined: Jul 14th '06, 07:47
- Location: DryDock Station orbiting over Sov. Latifundia
- Contact:
Oh, well in that case, I'll have to think of another way of killing Bobs, cause you see, I was gonna have a crusher crush all the stacked Bobs in one slot and another slot have the stacked Bobs sink into a lava pit.
Set the liquid to tag1 and make it a tag switch activating tag one, then set liquid heights to what you want.
Well the liquid light I think. In lights view create a new light and set it to liquid tide. Set the liquid to use that light and set both to have tag one (in liquid and light views).
Last edited by $lave on Aug 30th '07, 04:15, edited 1 time in total.